[daniel_f.]

What does that mean? I also don´t have the hysteris in my xdf.. is there any way how i can get it?

Currently its not implemented. We´re still behind what we wanted to have achieved by now, so its basically a matter of time until LC works like expected.

 

[44chris]

Thanks daniel, if there is anything I can do to help you guys out let me know, willing to help as much as possible.

Currently its not implemented. We´re still behind what we wanted to have achieved by now, so its basically a matter of time until LC works like expected.

 

[celoe46]

Currently its not implemented. We´re still behind what we wanted to have achieved by now, so its basically a matter of time until LC works like expected.

Hey daniel first I want to say thank you for everything you done allowing us to be able to tune our e46s... I just have one question has Launch Hysteresis parameter been implemented yet?

 

[daniel_f.]

Hey daniel first I want to say thank you for everything you done allowing us to be able to tune our e46s... I just have one question has Launch Hysteresis parameter been implemented yet?

Kind of. you can use c_n_max_hys_max to modify it.

I think its also stated in the wiki!

 

[celoe46]

Kind of. you can use c_n_max_hys_max to modify it.

I think its also stated in the wiki!

Yeah it is stated on wiki and I tried it before but didnt really notice a change. I tried setting it to 32 and it was still the same so I set it to 64 and still didnt notice a change.

 

[Pacsat]

Hi,

did anyone know if this LC work at all with SW4300037?
I have tried it with the tweaked settings, but engine doesn´t limit rpm.

 

[sda2]

Supported only in v56, WITH THE SPECIFIC BIN FILE.

 

[Blu302]

Note, you need to update the 512kb file to the launch file.

 

[Sykriss]

Anyone get it working on MS42 yet?

 

[Barracuz]

I could swear I only uploaded the non LC bin as I was having trouble flashing the LC bin. Yet there I was for shit and giggles flooring it in first and rev limiter bounced off 4k rpm or so

 

[cwarel]

Note, you need to update the 512kb file to the launch file.

So where is 512 launch file? cant find it

 

[Barracuz]

In the Google drive folder there's a folder named launch. Bins with launch have a '_LC.bin' at the end

 

[lujurisic.pt]

Is it possible to have LC configured to brake switch? I have ZF 5HP19 and after trying Alpina flash I just don't want manual swap. No hate guys.
Daniel, your work is awesome, thanks man for so much stuff shared! :thumbsup:

 

[FissiM]

Can any help me with Launch Control
I have m54b30 engine from e46 330ci I swap in e36
I flesh full file from Daniel and don't work , I don't have clutch switch so I make button simple to try with 2 wires , one wires in pin 23 and other in negative of battery but don't work , clutch switch in inpa work when I press and depress

 

[Nedim]

This evening I tried to make launch control to my ms43. Following the steps from wiki. I downloaded the logger for my engine load it in tuner pro also load the xdf. Made the following tables. Made full write with ms4x Flasher. The car started with the new verison but LC DOESNT work I think I am doing everyting as it is writen. Is there something more to do?

 

[rg1220]

This evening I tried to make launch control to my ms43. Following the steps from wiki. I downloaded the logger for my engine load it in tuner pro also load the xdf. Made the following tables. Made full write with ms4x Flasher. The car started with the new verison but LC DOESNT work I think I am doing everyting as it is writen. Is there something more to do?

I'd love to help - but I'm having my own issue. But, doesn't your DME say it's MS41 and not MS43?

 

[Nedim]

Sorry I have posted the wrong picture. I edit it now...

 

[Nedim]

Little update. Tried with the brake switch... Still the same... Rpm goes to 6500... I am wondering if the made maps are correct.

 

[rg1220]

Little update. Tried with the brake switch... Still the same... Rpm goes to 6500... I am wondering if the made maps are correct.

I ended up using the exact same bin (MS430056, M54B25, EWS delete, and Launch control, right?) and launch control isn't working for me. I didn't modify any of the launch control values, from the bin though (I assumed they were already set properly).

 

[Nedim]

Little update. Tried with the brake switch... Still the same... Rpm goes to 6500... I am wondering if the made maps are correct.

I ended up using the exact same bin (MS430056, M54B25, EWS delete, and Launch control, right?) and launch control isn't working for me. I didn't modify any of the launch control values, from the bin though (I assumed they were already set properly).

I dont think that they are set. Try to make it as the picture in the wiki or like my maps.