Hey everyone,
I recently installed the 135i calipers on my e46 m3, all 4 calipers were installed,
fronts were installed with csl rotors, rally road stainless lines and reboot engineering caliper mount, no issues there looks and works great.
My issue is the fitment with the rear calipers, I installed them also with new e46 m3 csl rotors, modified the dust shield to fit the caliper but the caliper doesn't reach the full diameter of the rotor, leaving a rust ring to develop on the inside edge of the caliper. Wondering if there is a different pad I can run in the rear or how others have solved this issue
thanks!
I recently installed the 135i calipers on my e46 m3, all 4 calipers were installed,
fronts were installed with csl rotors, rally road stainless lines and reboot engineering caliper mount, no issues there looks and works great.
My issue is the fitment with the rear calipers, I installed them also with new e46 m3 csl rotors, modified the dust shield to fit the caliper but the caliper doesn't reach the full diameter of the rotor, leaving a rust ring to develop on the inside edge of the caliper. Wondering if there is a different pad I can run in the rear or how others have solved this issue
thanks!
