I can confirm konf_abgasanlage triggers works on MS42. This was my first ever "mod" to my DME.

 

..

 

thank u both guys!

 

i really hope the wiki gets a update soon

 

Feel free to add your findings ;-) a wiki is based on people sharing their knowledge

 

can i add a section on how to downgrade to the Ad software and how to align ews so your car can run the tunable xdf i can confirm the chipster checksum correct works

 

Please please please! You can create an account on the wiki. This diy would be a life saver

 

hey i added a little segment on how to dowgrade to the AD software in the WIKI . i know its not much but it sure can be helpful to alot of new guys.

 

This should be pretty easy to do on my own correct? All im looking to do is delete post cat O2s and the SAP. I have JMGarage flasher, Tunerpro, and Galleto.I also have the XDF from the MS42 wiki...

Will I just need TunerPro, the XDF, and the Checksum corrector? By the way I have no idea what a checksum corrector is, this is all VERY new to me.

 

the Checksum corrector? By the way I have no idea what a checksum corrector is, this is all VERY new to me.

its a tool that could help you to avoid getting DTC 100 "ecu selftest failed"

 

Any ideas why i get only 00000 as values allmoust in all maps?

 

Hello, help me please ews off in this file?

https://yadi.sk/d/uy3bpccM38z4HL_nr_

 

has anyone found a way to delete the ews for ms42?

 

Shure

 

In the 32kb file there is no code ;-)

 

Oh okay so it has to be in the 512kb file. Im having a hard time finding the ews section

 

Gents, could anyone share a secret of checksum disabling in full read?

 

I have been searching through the code for a while now with no luck. Car is still not running. I hate to beg, but can someone please help?

 

Feel free to purchase a file

 

If i purchase a file, it will be encrypted which defeats the purpose

 

What purpose?

 

Turbo 328i but i need to delete ews. With the encrypted file, i wont be able to mod the file at all

 

I don't sell encrypted files ;-)

 

Dan, could you give me at least hint on my question? have made some amendments in full read, checked in Ultimo CS corrector but error ecu selftest doesn't leave!!

 

Purchase the MS42 checksum corrector from chipster and you´re done

 

I have a problem because I am ripping my 32kbit file and editing it in TunerPro using
"MS42_Rev1-10_64kb.xdf" or "XDF_MS42_328_V6b_Row.XDF"

Unfortunately neither one nor two can find:
"Kf_zwb_sa_n_tkw"

Could someone send me the correct XDF under Ms42 driver?

 

It is part labelled and sorted for 32kb files. If some of the maps look strange, I was building it before the V6b file was made. The map axis are not complete i some instances.

Your other option is to apply a base offset to the 512kb xdf. It is Ctrl + F2.

http://s000.tinyupload.com/?file_id=00003556627368753221

 

It needs to remove the vehicle speed sensor so that there is no problem with rev at 5500rpm, how can i do it? What to modify?

thank you

 

use nmax_diag_tv to set it as liked

 

Hi Guys. :hi:

Is there allready a solution to run LC (Launch Control) on MS42 (M52TU)?

I have found this video on YouTube but I think it`s a fake or maybe I`m wrong. :hmm:

E46 323i launch control

https://www.youtube.com/watch?v=Z6efNveF_EU

 

Its on ms43 ecu

Sent from my SM-G930F using E46Fanatics mobile app

 

Hello,
My original version of the firmware is 0110025, I write version 01100AD Virgin.

I changed pump parameters:
konf_ssp = 1 (Secondary Air Pump Delete)
epz_inc_rul = 00 (off DTC 96 Auxiliary Air Pump - Function)
epz_inc_slp = 00 (off DCT 35 Aux. Air Injection System Relay)
epz_inc_slv = 00 (off DTC 62 Aux. Air Injection System -Switching Valve)

It displayed me error and a check engine light:
126 activate solenoid valve tank-leck-diagnostic-pump

How to get rid of 126 error?
My car from the original 0110025 firmware doesn't display DTC errors.

I will be very grateful for the solution.

 

Hello,
My original version of the firmware is 0110025, I write version 01100AD Virgin.

I changed pump parameters:
konf_ssp = 1 (Secondary Air Pump Delete)
epz_inc_rul = 00 (off DTC 96 Auxiliary Air Pump - Function)
epz_inc_slp = 00 (off DCT 35 Aux. Air Injection System Relay)
epz_inc_slv = 00 (off DTC 62 Aux. Air Injection System -Switching Valve)

It displayed me error and a check engine light:
126 activate solenoid valve tank-leck-diagnostic-pump

How to get rid of 126 error?
My car from the original 0110025 firmware doesn't display DTC errors.

I will be very grateful for the solution.

0x481A6 epz_inc_ldp

 

You're the best.
The epz_inc_ldp was disabled by the DTC error 126 activate solenoid valve tank-leck-diagnostic-pump

 

Can we use Siemens Flasher Tool the same way we do on MS43? So we don't need to correct the checksum each time and put the ecu in boot mode?
Anyone know the software version for the MS42 EWSdelete bin on https://drive.google.com/drive/fold...olders/0BybpM7kNcnD5flA0QVdhbEpNbEpabENEbGhBZkVZZWpwT09kVDFMazEzMDhDSWVPRzFPTEU

 

anyone know the software version for the ms42 ewsdelete bin on https://drive.google.com/drive/fold...olders/0bybpm7kncnd5fla0qvdhbepnbepabenebghbzkvzzwpwt09kvdfmazezmdhdswvprzfpteu

0110ad