hmmmmm:hmm:.......try messing with the two rubber nobs on front support frame...you can lower and raise them by twisting them....see if that does anything

 

I already tried that and it doesn't do anything beside regulate the height of the hood from the top of the headlights. Any other ideas to help me push my hood more toward the driver/left side?

 

at the hood hinges, loosen the top bolt on one side, and the bottom bolt on the other side. Now you should be able to push the hood over.

 

are you sure it's the the hood and not the headlamp assembly and/or trim that's making it look off?

 

Hmm....interesting. I need to double check. However, why would my headlight assembly/trim be off? Their placement (via the headlight screws) are non adjustable. They only fit one way.

 

^....might be right...check the gap on the hood and fenders and see if there the same...if it is the hood then your pass side fender should have a tighter gap then the other side.