I bought this one several years ago -

Amazon.com: EastFly Auto Fuel Injection Pump Pressure(0-140PSI) Gauge Automotive Injector Test Gasoline Tester Tool Kit for Cars Trucks Vehicles Engine (Not for Diesel Vehicles) : Automotive

Buy EastFly Auto Fuel Injection Pump Pressure(0-140PSI) Gauge Automotive Injector Test Gasoline Tester Tool Kit for Cars Trucks Vehicles Engine (Not for Diesel Vehicles): Replacement Parts - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

smile.amazon.com

 

Thanks I ordered it
kburger

 

Personally i would like a small permanent gauge like you see on modded cars,anyone know how to get that?

 

Just rent one from your local parts store.

 

Believe it or donut, a permanent gauge is a major failure point-
look up Bourdon tube gauge, and you'll see why. That tube is brass...

I have had to make up one using parts scrounged from the local
friendly bike shop's scrap parts pile- the cheap pumps have a short
screw- on hose that works really well mated to a small 100 psi gauge.

And yes, the Horror Fright sets don't all have it. D'oh.

t

 

Kudos to pointing this out.

Building my own and customer track cars. I love information (sensors/gauges) also love redundancy. However any system must NOT be a point of issue or potential failure. (See the guy with a direct wire ahmeter into the cockpit)

Most often the best for any such is a well placed sensor with it's mating gauge mounted inside. Albeit fuel pressure sensing is risky.

We now return you to your normally scheduled program.....

 

I for one am dying to know why you're testing fuel pressure. The suspense is killing me! 🍿

Seriously though, are you getting a code? I think we all want you to reach that 1,000,000 mile mark.

 

I will humbly reply at 750,000 miles i'm testing fuel pressure because i know what i'm doing? check out 50's kid you tube video on using fuel trims to diagnose codes. i'm on the third possible cause.
Thanks,
Kevin

 

I just use my tire pressure gauge.

 

ok extremely frustrated here. Here are two pictures. One is shrader valve with cap next to it. second picture is the second fuel pressure kit i have purchased. There is no fitting that will work. it needs to depress the tiny valve inside the shrader valve. Any help is appreciated.
kburger

 

Can you remove the internal valve its the same as a car tyre valve,just get a tool from a bicycle shop.Some valve covers have the tool on them.

 

ok thanks. Just swore i tested one time without removing core. watch 50's kid video on using fuel trims to diagnose p0170,p0173. does not remove core. i think i'll message the 50's kid.
kburger

 

sh**. 50s kid last seen 2018.

 

750,000 miles is quite a challenge. If any of you get there you will understand. Thanks again.
kburger

 

I bought that kit too and there's no adapters which fit. I bought another kit in the end Fuel Injection Pump Injector Tester Test Pressure Gauge Gasoline Cars Trucks Kit | eBay
The gauge in the first one was better than the second one.

 

well thank you all for the help. I'm getting a bit of attitude sorry. Just frustrated. cd0nc thanks. Hope that one works. It shouldn't be this difficult
Kburger