Hi All,
Can’t seem to find any information or advice on the following issue...
Cooling fan not working at all, there is both power at the high and low sides of the fan control module as well as good ground.
The two wires that exit the module direct to the fan motor are BOTH HOT!!!
Shouldn’t there be one positive current and one ground to allow the fan to operate or am I missing something. I’d suspect the module is faulty this being the case. Any thoughts appreciated. Thanks
Can’t seem to find any information or advice on the following issue...
Cooling fan not working at all, there is both power at the high and low sides of the fan control module as well as good ground.
The two wires that exit the module direct to the fan motor are BOTH HOT!!!
Shouldn’t there be one positive current and one ground to allow the fan to operate or am I missing something. I’d suspect the module is faulty this being the case. Any thoughts appreciated. Thanks