BMW E46 Fanatics Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi,

Long story short: no crank. First I thought it might be the battery on the key so EWS was not recognizing it, but then I noticed that in the small display on the right "P" was missing.

After some digging I found out that the sensor (Transmission Range Sensor) which sends the gear leaver position to some module might be broken. I found the part, replaced it but to no avail.

Is there a calibration procedure? I can't seem to find anything.

Please help.

Cheers
 
1 - 1 of 1 Posts
Top