BMW E46 Fanatics Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
Will these wheels fit my 2001 330i sedan:
PCD 5 120, offset 42, front is 18 x 8.5, rear is 18 x 9.5 (its a japanese wheel made by RAYS, am told its for the bmw 3 series)
Is 225/40/18 front and 255/35/18 rear the correct tire sizes for the above wheel (no rubbing problems) ?
thanks a lot!
 

·
Registered
Joined
·
45 Posts
Discussion Starter #4
Thanks, I found their website, so here's a pic. It looks like the bbs ch, but its two piece and has a one inch lip on the front wheel and 1.5 in lip on the rear wheel. Quality looks equivalent to or better than bbs. The red center cap is not to my liking though.
 

·
A bimmer chick moderator :)
Joined
·
48,236 Posts
whoa those look hella sweet! I like the black metal coating :yikes: 42 offset should be fine since most ppl have 43 on their bimmers
 

·
Registered
Joined
·
45 Posts
Discussion Starter #6
Thanks. Am seriously thinking about these. They're cheaper than bbs but more expensive than replicas. After review of previous posts and the information from the website, looks like a good fitment.
 
1 - 6 of 6 Posts
Top