[bfunk]

i'm looking at maybe doing a turbo project on my coupe and was wondering who has and how they like it, how reliable has it been, how much boost your running, stock or upgraded internals and what type of systems you have and what type of engine management your using

 

[bimmer07]

at the moment it'd be a completely custom setup. Horsepower Freaks is just now coming out with a turbo kit for the M3

 

[georgiev]

check this webpage... much better forum for e46 forced induction info:

http://www.bmwpsi.com

 

[bfunk]

does anybody know if this will fit a 323ci
http://cgi.ebay.com/ebaymotors/BMW-...0QQihZ008QQcategoryZ33742QQrdZ1QQcmdZViewItem

 

[ridin325]

yes it will

 

[Lay2Low]

Yes that manifold will work

 

[eurotekm3]

chrisman on bimmerforums.com makes a topmount manifold that will fiT e46's non-m

 

[bfunk]

i planned on going with a custom setup that's why i was asking questions, my next most important questions any suggestions on how to tune the car such as software fuel management and stuff.

 

[eurotekm3]

^ tuning is KEY....I would go with Active Autowerke for a custom tuning or Technik....... or talk to Vic Sias at www.siastuning.com about the TEC3R (EMS) ..Good luck!!! U can do it !!!

 

[GIO_21]

does anybody know if this will fit a 323ci
http://cgi.ebay.com/ebaymotors/BMW-...0QQihZ008QQcategoryZ33742QQrdZ1QQcmdZViewItem

yes the manifold would work and anyone can slap on a turbo kit for our cars but the tuning you will never get....there are rarely any turbo e46 in the world....it will be a lot cheaper to go with a supercharger or even a twin screw s/c which is great...contact any of the vendors such as AA and they will help you out :thumbsup: