E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 9 of 9 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
Where can I find .25" Medium density fiberboard. I am looking for either online sources, or somewhere in the DC/baltimore area. I dont need huge sheets, a square foot or so will do.
 

·
Registered
Joined
·
155 Posts
Home depot, at least the three closest to me, does not carry 1/4" MDF...just 1/2" and 5/8"
Confirmed. I just bought a 1/4 sheet of 1/2" and 3/4" MDF at ~$7 for each. As an alternative to 1/4" MDF, the OP might consider using 1/4" masonite. It's basically the same stuff as MDF, just higher density.
 

·
Registered
Joined
·
7,610 Posts
Home depot/lowes only sells full sheets of 1/2 or 3/4 typically, but they have smaller pieces (2 x 4) of 1/4" MDF, perf board and plywood. Usually in cubicles in the lumber area
 

·
Registered
Joined
·
251 Posts
I got a 1/4 sheet each of 1/2" and 1/4" MDF at my local Home Depot. All the 1/4 sheet sizes (ply, MDF, masonite, peg, etc.) are precut and on an aisle end cap in the lumber section at mine. They have 1/4", 1/2" and 3/4" MDF available in 1/4 sheets.
 
1 - 9 of 9 Posts
Top