E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
damaging the ABS-sensor when replacing bearing

when people change their bearings they always recommend removing the ABS sensor because they are afraid of damaging it. when i replaced my bearing I dont SEE how removing the bearings could ever damage the sensors. can someone explain?
Hi, as far as I can imagine is that it could be damaged then you remove the drive shaft because the ABS-ring is mounted on the drive shaft and the sensor is pretty close to it, or?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top