BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
Did a smoke test and found smoke leaking from a place that's meant to have a vacumm hose I assume as loads of smoke bellowing out but don't seem to see a hose to put on it. Any ideas conversion to a 325 so wonder was pipe not put in.photo attached of pipe it's at back of engine under where micro filter is behind where intake boot.
Thanks
 

Attachments

·
Registered
Joined
·
27 Posts
There***8217;s a vacuum cap that goes there. There***8217;s also 2 smaller ports back there. If there***8217;s a valve on the back of the intake next to it then it should hook up to the smaller port if not just cap them off
 
1 - 4 of 4 Posts
Top