BMW E46 Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1 (Edited)
Just curious, what settings is everyone running on their UUC sways? I'm not sure what i want to increase/decrease as in for understeer/ovetsteer. I just want a nice setup to improve the handling. So what's everybody running out there :dunno:

Edit: actually i do know what i want, i want to eliminate body roll as much as i can, and balance the oversteer and understeer. I searched, and thought maybe i should run em on the stiffest settings all around? Please give me your opinions here guys/gals :thumbup:
 

·
Registered
Joined
·
628 Posts
Firm (furthest hole) in the front, medium in the rear.

To borrow a quote from www.my330i.com: When deciding on how stiff to set your bars, remember: Starting with both bars in the middle hole will provide the most neutral handling. I chose to reduce the amount of understeer natural to BMWs by using the end hole on the front and the middle hole in the rear. The stiffer the front, the more understeer; the stiffer the rear, the more oversteer.
 
1 - 3 of 3 Posts
Top