BMW E46 Fanatics Forum banner

1 - 5 of 5 Posts

·
Banned
Joined
·
254 Posts
Discussion Starter #1
I installed my UUC EVO 2.9 or 3 SSK... whatever UUC calls it... :lmao:

When I put the stock wood shifter back on I get a noticeable vibration sound every time I change gears or touch the shifter at all. I took the shift knob off and I touch the shifter and the sound isnt there. So I know its the shift knob rubbing the shifter the wrong way or something... anyone else have this problem....? :dunno:
 

·
Mod Squad
Joined
·
10,843 Posts
try putting some tape around the top of the shift lever and then put the shift knob on. THe tape should tighten things up and prevent any rattling. Good Luck :)
 

·
Registered
Joined
·
614 Posts
I had it with EVO II and ACS metal knob. What I did was put a fair amount, enough to fill the top but not run out of the knob, of silicon sealer in. No noises or abnormal vibrations. Yes by definition it's gonna be a bit more sensitive to road and drivetrain noises/vibrations but this did take away the buzzing knob. My knob was a replica btw and did not have any plastic insert in it.
 
1 - 5 of 5 Posts
Top