E46 Fanatics Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hey Fanatics

We drive Bmws for their luxury and sport not for their convience and affordability.
My question is does anyone know whether there is a procedure for making a new to the car "automatic" Tranny compatible with my e46 after a Tranny swap and if so can it be done with INPA NCSexpert or Winkfp respectively. I believe the ews has locked the new Tranny out so I can't get outta 4th gear. My engine does turn over just the car doesn't go anywhere. My reason to suspecting the Ews has something to do with the fact that when I put the car in drive and reverse I can feel and hear a click happen in the little white ews box under the dash And I don't think that's normal.
 

·
Registered
Joined
·
8,276 Posts
If you swapped in an automatic transmission from a manual, you have to code the EGS to your Vin and code the DME + ews + cluster for automatic transmission. So using ncs expert, you'll add $205
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top