E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!
1 - 7 of 7 Posts

·
Registered
Joined
·
72 Posts
Discussion Starter · #1 ·
I was doing the RTABS with my friend, when my trailing arm wouldnt drop low enough to make the clearance to press them out, I figured out that my aftermarket sway bar was too thick and hitting the axles, no big deal, I just had to remove the sway bar.

But anyways, my friend thought it would be a good idea to remove the bolt for part 8 and 9 on this diagram thinking it would help lower the trailing arm: http://www.realoem.com/bmw/showparts.do?model=BN53&mospid=47713&btnr=33_0840&hg=33&fg=30

..... without my supervision or approval. Now, I figure these bolts are for toe adjustment, my question is, what is the torque specs on these things? I just wanna get them back in to the point where it's safe to drive on them without them flying out while on my way to an alignment.
 
1 - 7 of 7 Posts
Top