BMW E46 Fanatics Forum banner

101 - 103 of 103 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #101
yes learning experience, thank you guys for all the help and advice . this person i know of works out of his garage, maybe he will let me sit in and watch while he puts everything right again #learning experience
 

·
Registered
Joined
·
3,103 Posts
OP, let us know why the crank could not be turned more than 180 degrees, and if any valves were bent. Good luck.
 

·
Registered
Joined
·
319 Posts
I would think bending the valves by hand would be difficult. I timed my rebuilt engine last month, thankfully it was perfect on the second try. After reading all this, Sapote you have a lot of patience.
 
101 - 103 of 103 Posts
Top