It is supposed to do that, as commanded by DME under high temperature or load.when I floor the car, the temps drop too low to ~70C. A friend had the same issue.
Ok, then that may be a problem. I do not recall the target coolant temperature when DME commands map thermostat to open wider.Yes, it is commanded to drop to 82C, mine goes lower than 75 so the gauge starts moving down.
INPA allows you to specify an electric fan speed for testing.I'm not aware of a "Fan Test".
Yes, correct. INPA is much simpler with fairly limited test capabilities. This video shows it.What Sapote and you describe is not a Test Plan, rather a command or activation.