E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 20 of 46 Posts

·
Registered
Joined
·
226 Posts
Discussion Starter · #1 ·
My question is what is the first thing that you would mod after you bought yourself a bimmer? :dunno:
 

·
Lying, drunken cheat
Joined
·
4,326 Posts
Sway bars. At least on the non-sport version; body roll is atrocious. I can feel it even driving on the street.

Then a new clutch, because the stock one sucks. An SSK is great, but I don't recommend it until you're more familiar with the car.

After that, then get some clears. :)
 

·
Registered
Joined
·
151 Posts
Check out my sig.
vc
 

·
Registered
Joined
·
100 Posts
If it's stick, then swap out the CDV, at least thats the first mod I'm looking at doing, never had such terrible clutch action in my life.
 

·
Registered
Joined
·
177 Posts
Clears and Tints :thumbup:
 

·
Über-Geek
Joined
·
889 Posts
this is the order i did things..

1. Coil Overs
2. Rims
3. Sways
4. Exhaust (uuc tse2)
5. Intake / Software (gruppem technik stage1)
6. Camber Plates (for more neagtive camber)
7. Seats (corbeau FX1's)

Next:

Roll Bar
Flywheel / clutch

~T|/\/\
 
1 - 20 of 46 Posts
Top