E46 Fanatics Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
So,

my cylinder 5 has stripped out the threads on the head itself. I paid a friend of mine to try and use a thread repair kit; however, he didn't do the job properly and the thread insert could never stay in.

Is there anything I can do at this point ?

I've been told my only options are to:
1) replace cylinder head
2) replace engine

is there anything else ?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top