BMW E46 Fanatics Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
700 Posts
Banana_Bread said:
A flood of start button DIY's today! Hope this does not to take anything away from John V 325Ci's great writeup that he just posted.

I wrote this in about 2 hours last night so it's extremely rough. I don't know if i plan on updating it or making it look better so WYSIWYG.

http://members.shaw.ca/banana_bread/S2000DIY/s2000enginestartdiy.htm
Great write up:thumbup: :thumbup:

It in no way takes away from mine. Yours is much more of a custom job. My switch at least came ready to go, almost... either ways it looks that if anyone wants a push button starter they will need to use a dremel...

the total cost either way is about the same also. Although you said your switch will light up, mine doesnt..

Good job on your whole project:thumbup:

John V
 

·
The De46vil's Army
Joined
·
16,257 Posts
because you didn't cut the wires, you can start the car either way, i like that!!!! that way if i ever valet (only in vegas) the valet guy on't be thinking SHOOT, WTF...
 
1 - 7 of 7 Posts
Top