BMW E46 Fanatics Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter #1
So I have the Rogue pulley kit, and a belt for the UUC kit. They obviously use a different belt as the UUC belt slips with the Rogue pullies. I figured it would be the same, but it's not

The BMW part # is 11 28 1 469 261

What I am looking for is a part # for the same belt by say Gates, Goodyear, or another maker that I could get at the local parts store.

Thanks, bryan
 

·
Registered
Joined
·
607 Posts
Yeah, you can get them anywhere... It's as 6 rib x 1560mm long. I have the product numbers right around here somewhere, I'll post them when I find them

The belt for the Rogue Pulleys is:
BMW 11 28 1 469 261 (also from BavAuto, etc, made for the 525i)
Gatorback 4060615
Duralast 615K6

The stock air conditioner belt is:
BMW 11 28 7 512 762
Gatorback 4040340
Duralast 340K4

When you install it, don't forget that you need a rather large 8mm Torx. I got one at Sears for a few bucks that is mounted in a socket so you can easily use a breaker bar to pull the tensioners.
 

·
Registered
Joined
·
77 Posts
Discussion Starter #4
Thanks man. I appreciate it.

I actaully re-used the OEM belt. It works fine, as the slack or lack there of is compenstated by the tensioner.

Not a permanent solution, but for a day or two is hould be fine.

Thanks again, Bryan
 

·
Registered
Joined
·
607 Posts
Oh, let's keep going with this..... The metric conversion for the Rogue kit is 1560mm for the belt.
 

·
Registered
Joined
·
77 Posts
Discussion Starter #7
Oh, let's keep going with this..... The metric conversion for the Rogue kit is 1560mm for the belt.
Yes, the UUC belt had too much play in it to properly work with the Rogue pullies.

UUC belt part # from Gates is K060630 6PK1601

20mmx1616mm
 
1 - 7 of 7 Posts
Top