E46 Fanatics Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter · #1 ·
Ok,

So I followed the directions, and took out all the appropriate screws and stuff like that.

The next step includes taking out the fan assembly, so I can get to the stock pulleys.

The problem is I can't get the fan out. Do I need a special tool? The directions say I should be able to pull the fan right out?!

Thanks for the help

John
 

·
Beware of pwner
Joined
·
1,681 Posts
JohnnyM said:
Ok,

So I followed the directions, and took out all the appropriate screws and stuff like that.

The next step includes taking out the fan assembly, so I can get to the stock pulleys.

The problem is I can't get the fan out. Do I need a special tool? The directions say I should be able to pull the fan right out?!

Thanks for the help

John
If you have an automatic transmission with the clutch fan, you need a 32mm wrench to take the fan off.

Here's a link:

http://mywebpages.comcast.net/jns-johnson/pulleyinstall.htm
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top