E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
47 Posts
Discussion Starter · #1 ·
Hey guys,

I installed the module and have been able to get the open and close routines to work properly by adjusting the two screws, and work repeatedly correctly, however seems after I turn the car off, the next time I try using the remote, only a partial cycle completes. I've adjusted the screws at least three times to the same result. Anyone experiencing a similar issue? If it matters, I'm always using the same remote key. Thanks...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top