BMW E46 Fanatics Forum banner

1 - 1 of 1 Posts

5 Posts
Discussion Starter #1
Hey guys need some help.

I'm converting my brakes to M3 front and rear. The fronts are complete just need some help with research for the rears.

I have SS brake lines, ///M pads, discs, calipers and carriers. The only issue is the ///M rear trailing arm hub diameter is larger than non-ms. Thus I lose the parking brake (need it 'cause I'm a 5 speed)
These brakes will bolt up and work if I'm utilizing ///M trailing arms but I'm not sure if I can swap these without swapping some other parts.

Any assistance with this project is appreciated.
1 - 1 of 1 Posts