BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
is it better to get the alignment from a dealership using their alignment machines, or is it pretty much the same if I get it from Just Tires or Merchant's and have them aligned the tires for me? Thank you
 

·
Registered
Joined
·
690 Posts
quick answer

Either way, it's the same. They use a specs and any machine will put it back within that spec.

It's kind of like saying:
Should I use SNAPON or Craftsman tools to tighten my bolt/nut to 50 Lbs/Ft of torque. They will both meet that spec regardless of the tool used.
 

·
St. Louis BMW Fanatic
Joined
·
7,152 Posts
Re: quick answer

BeamerDaddy2001 said:
Either way, it's the same. They use a specs and any machine will put it back within that spec.

It's kind of like saying:
Should I use SNAPON or Craftsman tools to tighten my bolt/nut to 50 Lbs/Ft of torque. They will both meet that spec regardless of the tool used.
Yup. :thumbup:
 

·
Registered
Joined
·
508 Posts
Re: quick answer

BeamerDaddy2001 said:
It's kind of like saying:
Should I use SNAPON or Craftsman tools to tighten my bolt/nut to 50 Lbs/Ft of torque. They will both meet that spec regardless of the tool used.
That's actually a pretty good analogy!! :thumbup:
 
1 - 4 of 4 Posts
Top