BMW E46 Fanatics Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
352 Posts
Discussion Starter #1
what is the 2 pin yellow fuse for? it's included in the kit but is not mentioned in the installation instructions.

Thanks!
 

·
Registered
Joined
·
352 Posts
Discussion Starter #2
nevermind!.. should have done a search before posting :D
 

·
Registered
Joined
·
5,036 Posts
if you dont have one for the alarm already in the fuse box it goes in the fuse box by the glove box and it will say alarm....the wattage should match up too
 

·
Registered
Joined
·
352 Posts
Discussion Starter #4
i hear some ppl had problems with dealer not activating all the alarms (motion sensor, tilt sensor, etc)

any tips on making sure these are activated by the dealer before i take the car back?
 

·
Registered
Joined
·
5,036 Posts
well does the red thing under your rear view mirror blink when you lock your doors? or does your lights flash when you lock the doors?
 

·
Registered
Joined
·
352 Posts
Discussion Starter #6
i didn't get it activated by the dealer yet. i'm going to do that tomorrow.
 

·
Registered
Joined
·
352 Posts
Discussion Starter #7
oh man.. removing & installing the rear cowl panel's a bizatch :|

everything else took 5 seconds..
 

·
Network Analyst
Joined
·
3,487 Posts
boynix said:
oh man.. removing & installing the rear cowl panel's a bizatch :|

everything else took 5 seconds..
Funny, hardest part for me was the front air filter covers.

Although, I did drop the screws down into the battey compartment a few times.

"mother of !)[email protected] I gotta take out the battery...AGAIN!"

dave
 

·
Network Analyst
Joined
·
3,487 Posts
boynix said:
i didn't get it activated by the dealer yet. i'm going to do that tomorrow.
When they activate it make sure they don't disable the automatic door locking feature. That's assuming you have it activated to begin with of course.

dave
 
1 - 9 of 9 Posts
Top