BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
577 Posts
Discussion Starter #1
There is a ridge on the flange of the pulleys -- one side only. does this higher ridge go toward the front of the car or the engine side? Put another way, does it matter which side of the pulleys is facing out? Right now, I am putting the higher plange toward the engine, assuming you need the lower ridge tioward the front so you can more easily mount the belt.

Thanks.
 

·
Registered
Joined
·
577 Posts
Discussion Starter #2
A/C pulley that is...

The water pumponly goes one way. It's the A/C pulley I'm referring to. If I mount it with the UUC stampings facing out, the higher ridge is facing the front of the car. Is this correct?

Thanks.
 

·
Registered
Joined
·
577 Posts
Discussion Starter #4
Sorry, power steering is what I meant

Thanks for getting back with me. I took a guess and guessed right.

Thanks!

slow323ci said:
The UUC stampings face the front of the car.

And it's the power steering pully, not the A/C :)
 
1 - 4 of 4 Posts
Top