BMW E46 Fanatics Forum banner

1 - 20 of 27 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter #1 (Edited)
HAMANN DESIGN EDITION 19
One-Piece Forged Light Alloy Wheel
Spoke-Design
High-Polished
DIMENSIONS : 8.5J x 19 FA / RA 10 J x 19 RA
TYRES: 225/35 ZR 19 FA / RA up to 265/30 ZR 19 RA

This information is from Hamann official website
http://www.hamann-motorsport.de/
Anyone installed?
Is good?
Is strong?
:confused: I'm thinking to get this wheel because is forged.
:confused: Rear can put on sedan?
:confused: But in Hamman Complete Cars some sedan use 10,0 J x19 for rear how?
 

Attachments

·
Registered
Joined
·
1,306 Posts
66164321 said:
HAMANN DESIGN EDITION 19
One-Piece Forged Light Alloy Wheel
Spoke-Design
High-Polished
DIMENSIONS : 8.5J x 19 FA / RA
10 J x 19 RA
TYRES: 225/35 ZR 19 FA / RA up to 265/30 ZR 19 RA

Anyone installed?
Is good?
Is strong?
:confused: I'm thinking to get this wheel because is forged.
:confused: Rear can put on Sedan?
it is very stong, but 19x10 is only for M3 right now....reg E46 users need to run 19x8.5 all around.
 

·
Registered
Joined
·
64 Posts
Discussion Starter #4 (Edited)
Re: Re: Question about Hamann Design Edition 19?

lee2375 said:


it is very stong, but 19x10 is only for M3 right now....reg E46 users need to run 19x8.5 all around.
:confused: But in Hamman Complete Cars some sedan use 10,0 J x19 for rear how?
That is different wheels but use 10,0 J x19 for rear.:dunno:
 

Attachments

·
Registered
Joined
·
64 Posts
Discussion Starter #5
Re: Re: Re: Question about Hamann Design Edition 19?

66164321 said:

:confused: But in Hamman Complete Cars some sedan use 10,0 J x19 for rear how?
That is different wheels but use 10,0 J x19 for rear.:dunno:
 

Attachments

·
Registered
Joined
·
64 Posts
Discussion Starter #10
lee2375 said:
There are 2 offsets available for 19x10J HM2 (+44 and +22), but only one offset (+19) for the design edition.
So if i want a big foot for sedan i have to chose 19x10 HM2 for rear?
What is offsets 19x10 HM2 for sedan rear?:)
How about 19x10J PG3/PG2 for sedan rear?,or just like editon only one offsets?:confused:
How aout 19x9J PG3 can put on sedan rear?,Because is not 10J?:confused:
 

·
Registered
Joined
·
1,306 Posts
the only 19x10 you can use is either the PG3 or the HM2. Both a +44.

You can use the 19x9+44 for the rear in PG3, but there is not much difference in the way it looks from the 19x8.5+38...not much lip on either one.
 

·
Registered
Joined
·
2,311 Posts
The Design Edition is one insane wheel!!!

But it's too costly!!! I wanted it before I knew what the price was
 

·
Registered
Joined
·
668 Posts
for a forged wheel that looks a bit similar you could go for the new BBS CH forged, which unfortunately don't have the dish and high polish. Those are very good and BBS is a reputable brand. Design Editions are not worth it, IMHO, but if u are putting your car in shows, then it's all good.
 

·
Registered
Joined
·
64 Posts
Discussion Starter #17
To: lee2375

lee2375 said:
the only 19x10 you can use is either the PG3 or the HM2. Both a +44.

You can use the 19x9+44 for the rear in PG3, but there is not much difference in the way it looks from the 19x8.5+38...not much lip on either one.
If I use Hamann wide body, rear's offset is same like M3?
Can use 19or 22offset?:confused: How about front?
Also can use 20inch wheel ma?
Wht you recommend/opinion.:)
 

·
Registered
Joined
·
151 Posts
i believe most of you have not seen this wheel in person and have not picked it up...it is very light, strong, and a very good wheel. i do believe it was worth every penny i paid for it. being that i have gone thru a few wheels myself. i think that it was well made and was a nice look. if anyone is to get this wheel i strongly reccommend it other than the fact that it is a fully polished wheel it will get dirty and scratched so good care is required.
 

Attachments

1 - 20 of 27 Posts
Top