BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
1.888.JLEVISW
Joined
·
29,482 Posts
Discussion Starter #1
So I did a DIY install with my PSS9's and everything is great. But I have to problems. The rears seem to chatter when I go over bumps and things...and I'm not sure exactly how to fix this. My second big problem is my anti roll bar linkage came loose. I cant really see cause it's dark but the part that bolts on may have snapped off. There is a round part but I cant really see the pivot thing covered by rubber anymore. Is this a hard thing to fix? I'm kinda freakin out here so any help is appreciated...
 

·
Registered
Joined
·
128 Posts
Is there metal on metal contact in your rear suspension? You need to make sure that top rubber hat is on top of the spring, and the blue teflon ring is on the bottom perch.
 

·
1.888.JLEVISW
Joined
·
29,482 Posts
Discussion Starter #4
celicatoe46m3 said:
Is there metal on metal contact in your rear suspension? You need to make sure that top rubber hat is on top of the spring, and the blue teflon ring is on the bottom perch.
On the my330i.com site...they said that you did not need the blue teflon ring for the rears...
 
1 - 4 of 4 Posts
Top