[Washdown]

Hey guys, i bought a Dietz 1250 or 1260... i dont know the differences between these but i have a strange problem with it. I hope you can help me with this.

I installed the Dietz 1250 correctly, have also video of my iPhone on my 16:9 but when i switch source back to my bmw bordmonitor i get a quite strange screen. A sort of blue rolling stripe about my screen.

Install:

Here 2 video's.. 1 of my working iPhone screen and another of that strange stripe...
http://www.youtube.com/watch?v=mnrv3PY2lCU

http://www.youtube.com/watch?v=S704o5b7xWw


My car is a BMW E46 325Ci made in 2001, upgrade my navi 4:3 screen with a 16:9 and MK4.. standard with a analog LEAR TVtuner but now replaced with a Dietz 1257 cable.



The Dietz is connected in place of my TV tuner and connected with a Dietz 1257 as replacement of my TV module.

Scheme:

BMW TV Blue connector: --> in blue connection of Dietz 1250 --> black connector in Dietz 1250--> Blue stecker Dietz 1250 in blue connector of Dietz 1257 cable... the other end of Dietz 1257 cable in White TV modul connector

 

[kalin0u]

greeting, sometimes it arrives with the dietz, it is just necessary you to support clock on the key to come back in normal mode (small BMW) then to rekindle module. desolate am French therefore by very gifted in English

 

[Washdown]

ok, thnx.. i will try it U got the same problem?


I got also a answer from Tom of EAS... he said: i must put a sort of relay between the dietz, but i dont know which cables i must connect..
I hope someone can give me some help with it?

 

[kalin0u]

sometimes I have the same problem when I put into service the dietz with the button of GPS. therefore I begin again and after it's good

 

[Washdown]

i tried several times to switch to the Dietz but every time got the same problem :ben: