BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I've searched all over and can't seem to find an answer to my question.

I have a service engine light on so I ordered the Peake tool after reading everyone's posts on here.

I hooked it up and after I press go with Fc, the following numbers come up:

19, 10, 8d, A8

Am I correct that this means table 19? But under 19, there is no 10 or 8d. A8 says that the coolant thermostat is jammed open.

If anyone can provide some guidance, I'd appreciate it.

Thanks
 

·
Registered
Joined
·
175 Posts
Send an email to their tech support (should be in the manual somewhere.) They'll probably tell you to reset the codes and read them again- that's what they told me last time.

Sent from my DROIDX using Bimmer App
 
1 - 4 of 4 Posts
Top