E46 Fanatics Forum banner
1 - 1 of 1 Posts

462 Posts
Discussion Starter · #1 · (Edited)
Who has done it?

I don't have the tools or space right now to cut into my door panels. So I am looking to piece together some front components off of part-express.
Or use my CDT Classic Comp 6 1/2 tweeter and crossover with a 5 1/4 inch driver that will fit in the stock location.
If anyone has done something simliar, let me know.

I would be powering everything up front with a 65w x 2 amp..
I may try to get something from AudioControl or similar that lets me go more "active" on the fronts and leave out crossovers and home brew "bass blockers"

This Dayton looks like it might be better, but also may be too deep.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.