BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
790 Posts
Discussion Starter #1
I have always noticed that one of the power steering hoses hangs wayy too low when the front splash guard is off. Since I always leave it on apart from when I am working under the car, I have never given it a second thought.

Upon closer inspection, I noticed that there seems to be evidence of a bracket that the hose would bolt onto for support that had been sheered off. I reviewed realoem and there was no part number listed.

Any information is appreciated.

JC
 

·
Premium Member
Joined
·
3,479 Posts
Yeah. There is no part number. Either buy the whole hose assembly or figure out your own way of suspending the hose. Wire ties or make your own bracket.


Sent from my iPhone using E46Fanatics
 

·
Ironman
01 330iT 6MT, 98 M Roadster
Joined
·
4,946 Posts
Or you could try to find one at a salvage yard. That may be tough since they usually pull the engine immediately and may or may not leave the hose. Worth a shot though.
 
1 - 4 of 4 Posts
Top