BMW E46 Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
the nozzle tube that goes in from the front does not stay in place, so when I operate the washer, the nozzle and tube is shot out like a cannon.
I pulled both out to install projector46. the passenger side is back together fine. the driver side headlight washer I guess is broken. I may have to replace the whole actuator unit. Anybody got the p/n for it? one of the parts sites show a exploded diagram and called it a telescoping back.
or am I missing a step? thanks.
 
1 - 3 of 3 Posts
Top