I had several oil leaks on my 2001 325i. I replaced the Valve cover gasket, oil pan gasket and finally the gasket from the oil filter housing to the engine block. After finishing, I immediately noticed that my oil filter started leaking. I replaced all the o-ring seals on the filter and it stopped leaking. But then I got another leak from what appeared to the oil filter housing gasket again, and a significant leak, worse than before. I was very surprise to see so much oil leaking and immediately thought that I somehow installed the gasket incorrectly so I took everything apart to check the gasket. The gasket look fine, so I put everything back together very carefully, but I got the same leak. I double checked the oil line from the housing to the vanos system, but it did not seem to be leaking especially for the amount of oil being leaked. It was almost as if there was no gasket at all. A friend thought that maybe my Vanos was malfunctioning and not allowing oil to to flow into it causing an increase in oil pressure and forcing the leak. I don't know about this, so I'm here to see if there can be any other reason for the leak. I really hoping to find the solution for this, I'm tired of all the oil leaking. So any suggestions will be great.
2001 325i'mde birkaç yağ sızıntısı vardı. Valf kapağı contasını, yağ karteri contasını ve son olarak yağ filtresi gövdesinden motor bloğuna giden contayı değiştirdim. Bitirdikten sonra, yağ filtremin sızdırmaya başladığını hemen fark ettim. Filtredeki tüm o-ring contaları değiştirdim ve sızıntı durdu. Ama sonra tekrar yağ filtresi mahfaza contasında görünenden başka bir sızıntı ve öncekinden daha kötü önemli bir sızıntı aldım. Bu kadar çok yağ sızdığını görünce çok şaşırdım ve hemen bir şekilde contayı yanlış taktığımı düşündüm, bu yüzden contayı kontrol etmek için her şeyi söktüm. Conta iyi görünüyor, bu yüzden her şeyi çok dikkatli bir şekilde bir araya getirdim ama aynı sızıntıyı aldım. Gövdeden vanos sistemine giden yağ hattını iki kez kontrol ettim, ancak özellikle sızan yağ miktarı için sızdırıyor gibi görünmüyordu. Neredeyse hiç conta yok gibiydi. Bir arkadaşım, Vanos'umun arızalı olabileceğini ve içine yağın akmasına izin vermeyerek yağ basıncının artmasına ve sızıntıya neden olabileceğini düşündü. Bunu bilmiyorum, bu yüzden sızıntının başka bir nedeni olup olmadığını görmek için buradayım. Gerçekten buna bir çözüm bulmayı umuyorum, tüm yağ sızıntılarından bıktım. Yani herhangi bir öneri harika olacak.
[/ALINTI]
Yıllar sonra bahsedeceğim. Ben de aynısını yaşıyorum. 3. Bir kez söktüm ve hala sızdırıyor. tamam yaptım. sorun ne olabilir. bir çözüm buldun mu?
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
E46 Fanatics Forum
17.9M posts
592.5K members
Since 2001
A forum community dedicated to BMW E46, E90, and F30 owners and enthusiasts. Come join the discussion about M performance, turbo kits, engine swaps, builds, modifications, classifieds, troubleshooting, maintenance, and more!