E46 Fanatics Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
283 Posts
Discussion Starter · #1 ·
Do I need to reuse the OE bumpstop when installing Koni FSD front struts? Seen a few people asking the same question but no definitive answer. Im planning on reusing the old bellows.
 

·
Registered
Joined
·
34 Posts
I've just mounted FSD kit for sport suspension (drove 100 miles) and I bought new BMW rubber boots and bump stops. I've left BMW sport springs and so far I had no issue of bottoming. Have in mind that roads here are not good at all, so I believe that it is OK to go with original bump stops if you retain original springs as well.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top