BMW E46 Fanatics Forum banner

1 - 3 of 3 Posts

·
Senior Eurowerkz Member
Joined
·
13,189 Posts
Discussion Starter #1
hold down button on dash (tire senser button) for 4 seconds
while car is runing in neut.. you will see tire senser symbol flashing yellow for 12 seconds then it will disappear then you have to drive for 10 minutes so the system can adjusted to the pressure in the tires

have to do this very time you add air to tire or fix a flat i guess
any time you change the ammount of air in any of the tires

NOTE: if you shut the car before you drive the ten minutes system
won't be adjusted to the tires pressure and that red symbol
will keep coming back.

was told about this last night by a manger of a bmw garage
cost me 10.00 tip now i have no more red flashing symbol in front of me lollllllllll though you others m3 drivers would like to know
about this

LIKE TOMMY AND PETE those crazy driving devils lolllllllllllllllll
bobm3 ;) ;)
 

·
Senior Eurowerkz Member
Joined
·
13,189 Posts
Discussion Starter #3
what me read i did but just 2 out of 4

i must of miss that i had 4 manuals i finished 2 i been to busy driving the car untill i break in engine i am up to 1,400 milles i little bit more than i will study them some more
bobm3 ;) ;)
 
1 - 3 of 3 Posts
Top