[globemaster3]

i would like to remove my european license holder from the front of my car (and leave the us-sized license plate holder). do you have any suggestions on how to do this? i can only pull the euro plate holder up 1 inch (it slides up/down on top of the us plate holder). i don't want to break something in the process...

:andy:

 

[russ330]

Well, for my US one, you just gotta take off the plate, which reveals two screws on the other side. The plate holder was drilled into my bumper. :sad:

Edit: Too fast with the submit button :tsk: Anyway, the Euro plate holder maybe the same :dunno:

 

[globemaster3]

yeah, i want to be able to put in a us-sized license plate...
how do i get the euro plate out of the euro plate holder?
i tried pulling the corners out - which is how i bent it

 

[beach]

underneath the plate holder, uoi have clips. look at the underside of it and you will se what I mean, take a screw driver and jam it in each one to release it, it comes off easily, then you can just tug on the mouldings from bottom to top to pull that one off...

here is an example of what you have:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=50452&item=2443244594