P.S The engine works fine when the DME's EWS is OFF. It starts correctly.
N42B20 EWS to work with M52TUB20
Hello,
I've used WinKFP to match the DME's vin number with my ABS module.
However, by doing that, the EWS got activated and the engine doesn't want to start.
November 2020, I did an engine swap with which I didn't receive the EWS.
When the WinKFP process has completed, I used INPA to check for errors, I had an EWS error.
So I think, with the new update, the EWS is now turned ON again.
Is there a way to modify the BIN file to turn off the EWS ?
I would also like to turn off the "automatic gearbox" module from the DME.
Regards,
Shravan
I've used WinKFP to match the DME's vin number with my ABS module.
However, by doing that, the EWS got activated and the engine doesn't want to start.
November 2020, I did an engine swap with which I didn't receive the EWS.
When the WinKFP process has completed, I used INPA to check for errors, I had an EWS error.
So I think, with the new update, the EWS is now turned ON again.
Is there a way to modify the BIN file to turn off the EWS ?
I would also like to turn off the "automatic gearbox" module from the DME.
Regards,
Shravan
1 - 11 of 11 Posts
Hello,
I've used WinKFP to match the DME's vin number with my ABS module.
However, by doing that, the EWS got activated and the engine doesn't want to start.
November 2020, I did an engine swap with which I didn't receive the EWS.
When the WinKFP process has completed, I used INPA to check for errors, I had an EWS error.
So I think, with the new update, the EWS is now turned ON again.
Is there a way to modify the BIN file to turn off the EWS ?
I would also like to turn off the "automatic gearbox" module from the DME.
Regards,
Shravan
I assume its still on Ms42 for the DME after your swap, MS4x Wiki have the tools required to disable EWS on Ms42 and 43 when its done you do not need the Ews module at all.Hello,
I've used WinKFP to match the DME's vin number with my ABS module.
However, by doing that, the EWS got activated and the engine doesn't want to start.
November 2020, I did an engine swap with which I didn't receive the EWS.
When the WinKFP process has completed, I used INPA to check for errors, I had an EWS error.
So I think, with the new update, the EWS is now turned ON again.
Is there a way to modify the BIN file to turn off the EWS ?
I would also like to turn off the "automatic gearbox" module from the DME.
Regards,
Shravan
As for the Automatic Box you can recode the clusters IKE module easily using PAsoft, other wise you will have to delv into the running order of the vehicle via NCSexpert. search google 50skid Manual Swap and look for his Coding videos..
No, for the automatic box, there's some error which appears on OBD.. incorrect gear ratio 1,2,3,4,5 etc.. i've done a manual swap as well.. That's why I want to disable the automatic stuff.I assume its still on Ms42 for the DME after your swap, MS4x Wiki have the tools required to disable EWS on Ms42 and 43 when its done you do not need the Ews module at all.
As for the Automatic Box you can recode the clusters IKE module easily using PAsoft, other wise you will have to delv into the running order of the vehicle via NCSexpert. search google 50skid Manual Swap and look for his Coding videos..
Have you tried syncing the ews with inpa? I would assume you would have to do that if you have changed the vin on the unit, also alternatively like above follow the wiki on patching the bin with an ews bypass.
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk
Yeah i tried it.Have you tried syncing the ews with inpa? I would assume you would have to do that if you have changed the vin on the unit, also alternatively like above follow the wiki on patching the bin with an ews bypass.
Sent from my SM-G973F using Tapatalk
When I reset it, it says "ews and dme doesn't match"
I try to store, it says ews already contains value.
Did you disconnect the TCU .. you should get the cog of death on the cluster.No, for the automatic box, there's some error which appears on OBD.. incorrect gear ratio 1,2,3,4,5 etc.. i've done a manual swap as well.. That's why I want to disable the automatic stuff.
Yeah im not sure on that one then, easiest thing that I would personally do would be to just bypass the ews using the wiki patchYeah i tried it.
When I reset it, it says "ews and dme doesn't match"
I try to store, it says ews already contains value.
Sent from my SM-G973F using Tapatalk
this is a bit high level for meDid you disconnect the TCU .. you should get the cog of death on the cluster.
just a case of opening the ECU box and remove the connectors to it xDthis is a bit high level for me
PM Balidawg. He’s the guru around these parts.
1 - 11 of 11 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
E46 Fanatics Forum
A forum community dedicated to BMW E46, E90, and F30 owners and enthusiasts. Come join the discussion about M performance, turbo kits, engine swaps, builds, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
