E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 8 of 8 Posts

·
Registered
Joined
·
0 Posts
Discussion Starter · #1 · (Edited)
Hey everyone,

New poster to the forum, but after researching around have come up short of any info within the last year or so. Just wondering if anyone has cracked MS45 burble tuning? If so, what did you use?

Thanks!
 

·
Registered
Joined
·
919 Posts
I have been curious on this aswell. I did end up purhasing renovelo bytetuner but I am still reading and learning on what to do before I mess with it too deep. I originally purchased it for the ability to turn off post-o2
 

·
Registered
Joined
·
1,085 Posts
hmm okay. What software would be best for this?
Renovelo Bytetuner is what you'll use. Its the only software out there with full MS45 and MS45.1 map support.

The next question for you will be, what maps do you change to get the desired burble effect. If you get it figured out, post up so others can do it too.
 

·
Registered
Joined
·
7,318 Posts
Renovelo Bytetuner is what you'll use. Its the only software out there with full MS45 and MS45.1 map support.

The next question for you will be, what maps do you change to get the desired burble effect. If you get it figured out, post up so others can do it too.
Between sda2's XDFs and my flashing app, you should be able to do pretty much anything bytetuner can for the LO02S program

https://forum.e46fanatics.com/showthread.php?t=1269619
 
1 - 8 of 8 Posts
Top