[stanmo]

Hi,
Maybe the Craig or Ron at Streeteffectz could help me on this one. I would like to install Pioneer monitors on my headrests. I was wondering if it is actually possible to have the wires housed inside the metal poles (the metal rods will act as a conduit for the wires) on the headrests. The result is that you wouldn't see the wires even if you extend your headrests.
Thanks!

 

[[email protected]]

Yes, it is possible. I don't remember if they are hollow to begin with, but if they aren't, that's not a big deal either. If they are, all you have to do is cut one of the ends off, and then drill a hole in the top of the post. If they aren't, and machine shop should be able to drill straight down into them.