BMW E46 Fanatics Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi

I have an airbag light on in my 2000 E46. I have plugged in my laptop to try and read the fault code to understand which sensor might be at fault, but can never connect to the airbag ECU. When using INPA I get no response from control unit as an error (see copy and paste of the error readout message I get below). When I use EDIABAS I get a similar response along the lines of not being able to connect with the ECU.

Am I missing some files needed to 'talk' to the relevant other components of the car? if so any ideas where I can get the files?

Thanks


Kurz***8319;bersicht der SGs, die auf IDENT geantwortet haben:
-------------------------------------------------------------------------------
ECU/group answered Notation
-------------------------------------------------------------------------------
KOMBI46 yes Instrument cluster
IHKA46_2 yes Air conditioning
LSZ yes Light switch cluster
MS430DS0 yes Motor
RADIO yes All radio type except MOST-vehicles
PDCACT yes Park Distance Control ACT
SM46_3 yes Seat modul oder Easy Entry Driver
EWS3 yes Vehicle immobilization / Electronic vehicle immobilization EWS
ZKE5 yes Central body electronics
D_00A4 * Airbag ECU or Safety Info Module
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_009C * Convertible top module
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_0076 * CD-Changer I-Bus
### SYS-0008: JOB NOT FOUND
D_ABSKWP * Dynamic stability control
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_0065 * Electronic fuel pump
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_0032 * Gear box ecu
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_0048 * Japan Bit
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_0057 * Steering angle sensor
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_009A * Headlight level control
### SYS-0012: IDENTIFICATION ERROR
D_0066 * Light / Active Light Control
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_XEN_L * Light Xenon left
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_XEN_R * Light Xenon right
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_00F0 * Monitor
### SYS-0012: IDENTIFICATION ERROR
D_00BB * Navigation system Japan
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_007F * navigation computer
### SYS-0012: IDENTIFICATION ERROR
D_00E8 * Rain- light sensor
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_0070 * Tyre pressure control
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_SZM * Middle console center switch
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_00DA * Seat modul oder Easy Entry Passenger
### SYS-0012: IDENTIFICATION ERROR
D_00C8 * Telefon or Universel loading- and handsfree set
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_009E * Overrollsensor
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_00ED * Videomodule
### IFH-0009: NO RESPONSE FROM CONTROLUNIT
D_003B * Videomodule graphic part
### SYS-0012: IDENTIFICATION ERROR
D_ZUHEIZ * Auxiliariy heater
### IFH-0004: ERROR IN INTERFACE COMMAND
 

·
// Quandt AG (Retired) //
Joined
·
3,696 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Thanks for those files. I have managed to get most things working just the drivers for the OBD cable don't work. I'm running Windows 7 32bit. Do you have any way of installing the drivers for the cable?

Thanks
 
1 - 5 of 5 Posts
Top