E46 Fanatics Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
223 Posts
Discussion Starter · #1 ·
I have a sedan with stock suspension, not sport, with 16in type 44s and 205/55 front and rear. What is the maximum width spacer I could fit without rubbing? Also, if I get H&Rs where can I get extended bolts if necesary? I am thinking maybe the 8 or 10mm TMS for the front and the widest possible in the rear for a slightly staggered look. I have searched and not found a real answer, so any help is appreciated. Thanks, Mark.
 

·
Owner
Joined
·
3,732 Posts
I think you could go 15mm in the rear. I had 15mm spacers on the rear of my 330ci with the M68 Sports Package rims, and those were 245 width. You could probably even do 20mm, but I think 15mm should be your choice. 15mm spacers are hubcentric to BMWs if you get the H&R ones.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top