E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 12 of 12 Posts

·
Registered
Joined
·
163 Posts
Discussion Starter · #1 ·
To put on a 330 the M3 hood, it's necessary to modify fenders and bend the hood, but I didn't understand if it's also necessary to modify the connections (the stirrups to open/close the hood) or if they are compatible.

Thank you. :confused:



Ciao
 

·
has 1 FLY Ci
Joined
·
1,849 Posts
some person on this board claimed that they installed an E46 M3 hood on a regular E46. He said he works at a dealership and they have done this sort of thing with no modifications at all. :dunno:
 

·
Big in Japan
Joined
·
1,120 Posts
add richp to that list..WHAHHAA

it bolts on, so to speak, you will need the hood, the m3 hood shocks, m3 hood springs/locks, the m3 washer jets and m3 washer jet grill-thingy.
 

·
Europrojektz NW
Joined
·
774 Posts
RichP said:
add richp to that list..WHAHHAA

it bolts on, so to speak, you will need the hood, the m3 hood shocks, m3 hood springs/locks, the m3 washer jets and m3 washer jet grill-thingy.
My washer jets bolted on fine...I just needed the hood/grill and shocks...
 
1 - 12 of 12 Posts
Top