E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,535 Posts
Im assuming you're referring to my question and not the original question correct? This post alone has discouraged me to the point I think Ill just get a control-delete panel for my existing wheel. Steering wheel controls are the devil.
He's talking to the OP (the ZCP uses M-track mode), but yours is equally as hard... with a ZCP wheel you're a bit of the way there (the DSC uses a BUS connection meant for a computer interface, it's not a normal button (what Miles was talking about). The ZCP wheel would have the right button to match up to the connector, but it would just be a matter of having the wiring come up through the dash and into the steering wheel in a way that the steering wheel can still go lock to lock without it tangling up, coming out, loose, or anything...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top