E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Currently installing the bumper and noticed a gap that's between the edges and the middle. The middle and edges currently are perfect, but the space in between the middle and sides of the bumper still have a gap. Tried adjusting the bracketrs which got the sides to work, but the gaps next to the edges won't go up. Also tried sticking foam under the bumper to raise it but no luck with that. Any suggestions would be great.

Pictures: http://imgur.com/a/qx6IT_a_
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top