BMW E46 Fanatics Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
522 Posts
Discussion Starter #1
I have searched but cannot find the retrofit thread that I thoguht I had seen. What is entailed to make these work on a 2001 coupe? Is it just plug and play then a flash from the dealer? :dunno:
 

·
Registered
Joined
·
522 Posts
Discussion Starter #3
yes for 01's what......plug and play....or plug and play and flash....and if so what do I tell my dealer to "flash" (they arent to bright over there)
thanks!
 

·
OEM ///PLUS
2003 M3 6MT Slicktop
Joined
·
23,528 Posts
Stevo759 said:
I have searched but cannot find the retrofit thread that I thoguht I had seen. What is entailed to make these work on a 2001 coupe? Is it just plug and play then a flash from the dealer? :dunno:
You can install them and take a fuse out and add three resistors with no problems. That's what I did on OEM tail lamp LEDs. Or you can buy a new LCM and have it reflashed. LCM are something like $190 discount priced plus dealer reflash cost.
here is the link.
LED retrofit
 

·
A bimmer chick moderator :)
Joined
·
48,305 Posts
for 01s plug and play, you dont need to purchase a new LCM
 

·
OEM ///PLUS
2003 M3 6MT Slicktop
Joined
·
23,528 Posts
Here is the other link for a DIY you might find useful. Has some more info for you. Hope this helps.
LED DIY
 
1 - 6 of 6 Posts
Top