E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
389 Posts
Discussion Starter · #1 ·
Okay so i just got through installing some new F&R UUC camber plates and arms and my alignment is messed up pretty bad, not trying to wait forever its been like 2 days now....but i lowered my car a little while down there and i wanted to have the people at the alignment shop to confirm the two fronts are at the same height and the two rears are the same.....but they say the machine doesnt tell this!

all the shops in this POS AREA im stationed in is talking complete BS :ben:

is it relevant for them to be perfect match on each side?

and 235 35 19 in the fronts how much negative camber in the front can do before my tires wear terribly?:hmm:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top