[donBogi]

I rewired a few of the LEDs so they fit better into their segments and also replaced them with some 450 mcd strong ones since the old ones with 210 mcd weren’t visible during sunshine. They are still not too bright for night rides

 

[dior1995]

I rewired a few of the LEDs so they fit better into their segments and also replaced them with some 450 mcd strong ones since the old ones with 210 mcd weren’t visible during sunshine. They are still not too bright for night rides

View attachment 952642
View attachment 952641

wow the reslut came up nicely!
anyway, I checked the link of the cluster overlay yesterday. But it has 300kmh version, does the seller has the same the one like yours? I messeged the seller but hasn't replied yet.

 

[donBogi]

he does take his time replying. After buying you need to message him that you want the version with the original speed dial.

 

[GrubE46]

What does suck about this is that when you turn on lights all of this become blurry. Shift lights need to be covered in some way like other lights :/

 

[GrubE46]

Someone managed to make oil temperature gauge work?

 

[GrubE46]

Hello, some one have some news about cluster? Thats how mine is looking so far

 

[dior1995]

Hi, I'm back! has anyone ever swap the fuel econometer underneath the RPM gauge to Oil Temp gauge on non m cluster?

 

[dior1995]

So yeah. You need to move leds to fit it but maybe someone have m3 eeprom to play with it?

I have m3 eeprom I've taken out from my original M3 cluster. Now I'm wondering how to change the Fuel Economy Gauge to Oil Temp just like M3

here is the link of my eeprom

IKE_wr

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[GrubE46]

So im trying to do some update on my cluster. From what i found, procesor in bosch cluster can be different and thats why it cant show oil temp. So i've got idea that i can add my oil temp gauge, my oil temp sender and try to fit it to oryginal cluster. I couple of days i will try to test it.

 

[dior1995]

So im trying to do some update on my cluster. From what i found, procesor in bosch cluster can be different and thats why it cant show oil temp. So i've got idea that i can add my oil temp gauge, my oil temp sender and try to fit it to oryginal cluster. I couple of days i will try to test it. View attachment 962699
View attachment 962698

wow nice! keep us updated!

 

[ScadCZ]

Yeah this method working fine!

 

[dior1995]

Yeah this method working fine!

View attachment 963228 View attachment 963225

View attachment 963227
View attachment 963226

great job!!!

any details on how to done this step by step and what's the requirements?

 

[ScadCZ]

I don't have more photos, but it's simple. They work and look like OEM!

You need to buy oil temp gauge with a similar range. I took the front part of the original stepmotor for installation (glued) I took the power from the original cluster pin and a single cable separately leads the signal from the sensor (sender unit).

Under cluster face i just drill some holes

 

[buzya318]

Hi, I think regarding your issue there's must be an answer from this video

its on duration 15:56.

Hi guys . please tell me what was in this video since it was deleted? what needs to be transferred from the m3 dump so that the LEDs are activated? What to transfer from a regular dump to an m3 dump, in order to make a speedometer 240 and a tachometer 7, I have a concept, but I would like to transfer only the parameter responsible for the LEDs to the m 3 dump, so that the dashboard remains ci08 and not ci24 . thank you in advance .

 

[buzya318]

Hi guys . please tell me what was in this video since it was deleted? what needs to be transferred from the m3 dump so that the LEDs are activated? What to transfer from a regular dump to an m3 dump, in order to make a speedometer 240 and a tachometer 7, I have a concept, but I would like to transfer only the parameter responsible for the LEDs to the m 3 dump, so that the dashboard remains ci08 and not ci24 . thank you in advance .

I would also like to edit exactly the dump of the dashboard, in order to be able to use it with an automatic transmission

 

[buzya318]

Yeah it works, with scanner everything is easy

Gesendet von iPhone mit Tapatalk

guys help please. I can’t write in a personal to those who have earned it with a non-m dump. probably not enough posts. please unsubscribe what you need to edit in the hex code. the video is no longer available. thanks. I want to use an automatic transmission, but with the m3 dump this is not possible. and the oil level does not work.

 

[buzya318]

maybe someone needs original dumps from the m 3 dashboard? I have two pieces. one ci24 with manual transmission and the second ci23 with smg. they are both interchangeable, I tried, as well as completely replaceable with a dump with a regular ci08. I also tried to solder the missing parts on the board without the transmission screen. The smg and automatic transmission screens are different, but both work on the same board if you change the automatic transmission or smg dump. it would be cool if someone could add this part that is responsible for the automatic transmission in the m3 dump. If someone needs m3 dumps, I can send them to the mail, write to me.

 

[buzya318]

hi all . today I tested damp ci24 dashboard m in the dashboard not m ci 08 on the car. the oil temperature does not work ((for some reason I thought that if the rings work, then the temperature will also show. I tried to find differences on the board, but even the processor has the same marking. The differences are only in the elements responsible for the rear doors and the transmission screen. Someone there will be more suggestions where these settings can be stored if the eeprom transfer does not help?